Slide 1 -
Slide 1
Slide notes
On this Layout we see a Unit, and it must list
Asset Items. For this Unit, we will use Iteration Keys by Multi Rule.
Slide 2 - Slide 2
Slide notes
Slide 3 - Slide 3
Slide notes
We are using a Report from the System Example
Series.
Slide 4 - Slide 4
Slide notes
Slide 5 - Slide 5
Slide notes
For this type of Unit we do not need to list a Data
Source on the Main Document, although of course we can list any Data Sources we
may need for other parts of the Report.
Slide 6 - Slide 6
Slide notes
We also do not need a Pre Run, but we can add it if
we want, for example for Period selection.
Slide 7 - Slide 7
Slide notes
Slide 8 - Slide 8
Slide notes
The Unit that we will perform has already been
done. Let's have a look at it.
Slide 9 - Slide 9
Slide notes
Slide 10 - Slide 10
Slide notes
Slide 11 - Slide 11
Slide notes
Slide 12 - Slide 12
Slide notes
Slide 13 - Slide 13
Slide notes
Slide 14 - Slide 14
Slide notes
The Unit has 5 Tags, each of which performs a Data
Name on the source 'ATPARAMS', and each Tag will result in a column of Unit
output.
Slide 15 - Slide 15
Slide notes
This column is a number, and therefore we use the
'Iterative Numeric with iKey Select' Template. We have to state the Data
Source, and then select the Data Name to perform. Optionally, we can also have
a 2nd Data Name and an operation performed on the 2 results. The answer is
passed to an Accumulator so that we can glean the Total in the Main Document.
Slide 16 - Slide 16
Slide notes
Slide 17 - Slide 17
Slide notes
Slide 18 - Slide 18
Slide notes
Slide 19 - Slide 19
Slide notes
Slide 20 - Slide 20
Slide notes
Slide 21 - Slide 21
Slide notes
At the Tags in the Main Document, we see the group
of Tags that will display the Unit output, and the 1st Tag in the Group is the
one that calls the Unit. This is the Tag where we will use the 'Multi Rule with
iKeys' Template.
Slide 22 - Slide 22
Slide notes
Slide 23 - Slide 23
Slide notes
Slide 24 - Slide 24
Slide notes
Slide 25 - Slide 25
Slide notes
Slide 26 - Slide 26
Slide notes
Slide 27 - Slide 27
Slide notes
For any Source other than the GL, when we want to
use Iteration Keys for the Unit, we either use a Data Selector or else we use
the Multi Rule. The Multi Rule Template includes the Data Selection criteria.
Slide 28 - Slide 28
Slide notes
Slide 29 - Slide 29
Slide notes
Slide 30 - Slide 30
Slide notes
Slide 31 - Slide 31
Slide notes
Slide 32 - Slide 32
Slide notes
Slide 33 - Slide 33
Slide notes
Slide 34 - Slide 34
Slide notes
Slide 35 - Slide 35
Slide notes
Slide 36 - Slide 36
Slide notes
Slide 37 - Slide 37
Slide notes
Slide 38 - Slide 38
Slide notes
Slide 39 - Slide 39
Slide notes
Slide 40 - Slide 40
Slide notes
Slide 41 - Slide 41
Slide notes
Slide 42 - Slide 42
Slide notes
The Data Source is where we will select the
Iteration Keys from. If we do not know the Name, we can use the lookup.
Slide 43 - Slide 43
Slide notes
Slide 44 - Slide 44
Slide notes
Slide 45 - Slide 45
Slide notes
Slide 46 - Slide 46
Slide notes
Slide 47 - Slide 47
Slide notes
Slide 48 - Slide 48
Slide notes
Slide 49 - Slide 49
Slide notes
Slide 50 - Slide 50
Slide notes
Slide 51 - Slide 51
Slide notes
Slide 52 - Slide 52
Slide notes
The first line of selection Criteria may not use
the 'AND / OR' operators, and therefore the system inserts a star. We select a
Data Name and a Value range to select from.
Slide 53 - Slide 53
Slide notes
Slide 54 - Slide 54
Slide notes
The Data Name can be looked up or typed.
Slide 55 - Slide 55
Slide notes
Slide 56 - Slide 56
Slide notes
Slide 57 - Slide 57
Slide notes
Slide 58 - Slide 58
Slide notes
Slide 59 - Slide 59
Slide notes
Slide 60 - Slide 60
Slide notes
Slide 61 - Slide 61
Slide notes
Slide 62 - Slide 62
Slide notes
Slide 63 - Slide 63
Slide notes
Slide 64 - Slide 64
Slide notes
Slide 65 - Slide 65
Slide notes
Slide 66 - Slide 66
Slide notes
Slide 67 - Slide 67
Slide notes
Slide 68 - Slide 68
Slide notes
Slide 69 - Slide 69
Slide notes
We can use 1 or many rules. In this case, we need
only 1 rule to select the correct Keys.
Slide 70 - Slide 70
Slide notes
Slide 71 - Slide 71
Slide notes
If we do not choose any Data Names to sort on, then
the sorting is automatically by Key, which in this case is what we want.
Slide 72 - Slide 72
Slide notes
Slide 73 - Slide 73
Slide notes
Slide 74 - Slide 74
Slide notes
Slide 75 - Slide 75
Slide notes
Slide 76 - Slide 76
Slide notes
Slide 77 - Slide 77
Slide notes
Slide 78 - Slide 78
Slide notes
Slide 79 - Slide 79
Slide notes
Slide 80 - Slide 80
Slide notes
Slide 81 - Slide 81
Slide notes
Slide 82 - Slide 82
Slide notes
Slide 83 - Slide 83
Slide notes
Slide 84 - Slide 84
Slide notes
When we test, we find that our Unit performs
perfectly.
Slide 85 - Slide 85
Slide notes