a
Slide 1 -
Slide 1
Slide notes
Here we show a Layout with a Unit Line. This Unit,
once it is working, will show the Bank Account Balances.
Slide 2 - Slide 2
Slide notes
Slide 3 - Slide 3
Slide notes
But at the moment, when we test the report, there
is no result for the Unit. That is because we do not have the Unit Call
properly specified yet, and we want to use the Iteration Keys type of Unit,
with GL Double Rule, which will be perfect for this Unit to select the required
Ledger Account Keys.
Slide 4 - Slide 4
Slide notes
Slide 5 - Slide 5
Slide notes
We are using a Report from the System Example
Series.
Slide 6 - Slide 6
Slide notes
Slide 7 - Slide 7
Slide notes
For a Unit that works on the General Ledger, with
Iteration Keys, we do not have to state a Data Source. If we need any Data
Sources for other parts of the Report, then of course we can include them.
Slide 8 - Slide 8
Slide notes
We also do not need any Pre Run, but we can
certainly include a Pre Run for Period selection if we want to.
Slide 9 - Slide 9
Slide notes
Slide 10 - Slide 10
Slide notes
On the Tag List, we see the 3 Tags for the Unit,
although the Unit Call itself is not yet properly specified.
Slide 11 - Slide 11
Slide notes
We will first have a look at the Unit that we are
going to call.
Slide 12 - Slide 12
Slide notes
Slide 13 - Slide 13
Slide notes
Slide 14 - Slide 14
Slide notes
Slide 15 - Slide 15
Slide notes
Slide 16 - Slide 16
Slide notes
In the Unit itself, which is based on the GL, we
will typically use the 2 GL Name Templates, 1 for Numbers and the other for
Alphas.
Slide 17 - Slide 17
Slide notes
Slide 18 - Slide 18
Slide notes
Slide 19 - Slide 19
Slide notes
Slide 20 - Slide 20
Slide notes
Slide 21 - Slide 21
Slide notes
Slide 22 - Slide 22
Slide notes
Slide 23 - Slide 23
Slide notes
Slide 24 - Slide 24
Slide notes
Slide 25 - Slide 25
Slide notes
Slide 26 - Slide 26
Slide notes
Now we will perform our Unit Call, which will be
the Iteration Keys type, and based on the GL Double Rule selection option.
Slide 27 - Slide 27
Slide notes
Slide 28 - Slide 28
Slide notes
Slide 29 - Slide 29
Slide notes
For Iteration Keys type Unit Calls, we can use a
Data Selector or a Multi Rule Selection, or, in the case of the General Ledger,
we can also choose between the GL Single and Double Rule options.
Slide 30 - Slide 30
Slide notes
Slide 31 - Slide 31
Slide notes
So this is the Template for GL Double Rule
selection of Iteration Keys.
Slide 32 - Slide 32
Slide notes
Slide 33 - Slide 33
Slide notes
Slide 34 - Slide 34
Slide notes
Slide 35 - Slide 35
Slide notes
Slide 36 - Slide 36
Slide notes
Our 1st selection Rule in this example will be
based on the BSPOS Flag.
Slide 37 - Slide 37
Slide notes
Slide 38 - Slide 38
Slide notes
Slide 39 - Slide 39
Slide notes
Slide 40 - Slide 40
Slide notes
Slide 41 - Slide 41
Slide notes
Slide 42 - Slide 42
Slide notes
Slide 43 - Slide 43
Slide notes
Slide 44 - Slide 44
Slide notes
There are different operators available for the
Double Rule. We will use the 'AND' operator.
Slide 45 - Slide 45
Slide notes
Slide 46 - Slide 46
Slide notes
Slide 47 - Slide 47
Slide notes
Slide 48 - Slide 48
Slide notes
For our 2nd Rule, we will use the ODDSPOS Flag,
which is the same as Master Accounts.
Slide 49 - Slide 49
Slide notes
Slide 50 - Slide 50
Slide notes
Slide 51 - Slide 51
Slide notes
Slide 52 - Slide 52
Slide notes
Slide 53 - Slide 53
Slide notes
Slide 54 - Slide 54
Slide notes
Slide 55 - Slide 55
Slide notes
Slide 56 - Slide 56
Slide notes
This is the Unit we will call.
Slide 57 - Slide 57
Slide notes
Slide 58 - Slide 58
Slide notes
Now our GL Double Rule Unit is properly specified
and we can test the Report again.
Slide 59 - Slide 59
Slide notes
Slide 60 - Slide 60
Slide notes
Slide 61 - Slide 61
Slide notes
Slide 62 - Slide 62
Slide notes
Slide 63 - Slide 63
Slide notes
Slide 64 - Slide 64
Slide notes
Slide 65 - Slide 65
Slide notes
Slide 66 - Slide 66
Slide notes
Slide 67 - Slide 67
Slide notes
And this time we have a good result for the Unit.
Slide 68 - Slide 68
Slide notes